10593010_V_1_0.DOC
28/35
Installing the headshell
Screw the system on the tonearm and tighten the fixation screw. Never overtighten in order not to dame the
tonearm or headshell.
Installing the counterweight
Screw the counterweight onto the tonearm's back.
Make sure that the scale ring points to the front.
Adjusting the counterweight
• Remove the stylus cover.
• Set the Anti-skating-wheel to the 0 position.
• Set the tonearm lift to the down position
• Release the tonearm from the armrest and move it to a position between the turntable and the armrest.
Make sure that you do not damage the stylus.
• Carefully hold the tonearm and adjust the
counterweight by turning it clockwise or anti-clockwise
respectively. The tonearm should be balanced to a
horizontal position.
• Move the tonearm back to the armrest and clamp it.
• Put the stylus cover on the stylus.
• Set the scale on the counterweight to the 0 position
without turning the counterweight.
Caution:
Hold the counterweight with one hand in order not to change the balanced setting (stylus pressure = 0). Only
move the scale ring.
• Turn the counterweight clockwise until the scale shows the value corresponding to the pressure of the used
stylus. Please follow the pick-up system manufacturer's instructions.
