10593010_V_1_0.DOC
27/35
SETUP
Place the turntable on a plane, stable ground for carrying out the setup.
Installing the pick-up system
Read the user manual of the pick-up system.
Put the stylus cover on the stylus.
Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the
occupation of the cables is correct.
The different colours mean:
Used colour:
Channel and poles:
White (L+)
Left, plus-pole
Blue (L-)
Left, minus-pole
Red (R+)
Right, plus-pole
Green (L-)
Right, minus-pole
Only tighten the screws on the Headshell loosely, so that you can still move the system.
Adjusting the overhang/azimuth
The overhang is the distance between the stylus and the center of the turntable.
For optimized pick-up, the overhang should be set to 15 mm.
Move the system forwards or backwards until you reach the desired position.
Position the system so that it is centered (correct azimuth).
Tighten the screws again.
