80-J7616-1 Rev. C
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
38
12)
TT150 System Uninstallation
Before Uninstall
If you intend to reinstall the TT150 on a different trailer later (instead of a scrap or RMA) and
the terminal is in good shape, then refer to Appendix C: Component Information to order the
appropriate rivets or VHB tape.
TT150 System Removal
1.
Disconnect the 2 power wires and the ground wire in the 7-way connector.
2.
Cut the fuse holder from the power wire. Salvage the fuse and fuse holder.
3.
If the power cable is not secured behind the trailer wall, pull the cable up from the 7-
way.
4.
Carefully drill out the rivets attaching the terminal to the trailer using a 1/4” drill and a
rivet drill template. Ensure the plastic housing is not damaged.
5.
Remove the TT150 unit assembly.
