80-J7616-1 Rev. C
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
13
3.
Verify that the crimps are good and the wires have not been damaged.
4.
Do a pull test. Pull on both ends of the wires to ensure a solid butt-spliced connection
exists. The crimped butt splice securely grips the insulated wires.
Strain Relief
If there is sufficient wire available for the Four-Finger Wrap Method:
1.
Wrap a wire around four fingers of a hand, one full loop, so that the wire loop is longer
than the wrapped butt splice.
2.
Pinch the loop tightly and center it against the wrapped butt splice.
3.
Secure the wires together and place 4" tie wraps at the outside ends of the butt splice.
4.
Cinch the tie wraps tight and cut them
flush
to the lock head.
