3
negative pressure
sealed contaminated
sealed
clean
room
clean
filtered
air
contaminated
containment area
contaminate
d
air
positive pressure
clean contained
area
clean
filtered
air
The OmniAire 2000 is a compact and versatile, variable speed HEPA air filtration machine/air scrubber that delivers the
performance of full size negative air machines. It is used for removal of toxic mold, asbestos and lead dust during renovation and
abatement projects, and for purifying air in commercial, factory sites and medical facilities. Designed and built with multiple filter
options including HEPA, 8-Pocket Bag filter for construction dust, and activated carbon filters to meet your job requirements.
Additional accessories include intake manifold, flex ducting and quick clamps.
Application Examples
To create
NEGATIVE PRESSURE
inside the containment,
more air has to be exhausted out than leaks into the
containment. Place the machine inside the containment and
hook a flexible duct to the outlet ring of the machine
exhausting to outside the containment.
(See Above) All of the air being exhausted has been treated
by the HEPA filter so no contaminants are being exhausted
from the containment.
To create
POSITIVE PRESSURE
inside the containment, more air has to be
pumped in than leaks out of the containment. Place the machine outside the
containment and hook a flexible duct to the outlet ring of the machine ducting
the exhaust into the containment. (See Above)
OmniAire 2000 Specifications
Airflow: 900CFM Low, 1900 CFM (OA2000C)
400-1900 CFM Variable Range (OA2000V)
Power Requirements: 115VAC/60 Hz/10.6 Amp or 230VAC/60Hz/6.0A
Motor 1.25 HP with thermal overload (115VAC) or 1.0 HP with thermal overload (230VAC)
Optional: MERV 15 bag filter; OdorGuard 600 activated carbon web filter; VaporTrap V-bank filter (27 lbs of active carbon); HEPA
filter 99.99% @ 0.3μ
Filtration:HEPA filter 99.97% @
0.3μ;
MERV 9 primary/secondary filter
Recessed Controls: speed switch - HIGH/OFF/Speed Control (OA2000C); variable speed controller (OA2000V); amber change
filter light; red power indicator light
Housing: aircraft grade aluminum; silicone sealed before
riveting; 12”
outlet; (4) rubber grip handles; (2)
5”
hospital grade locking
casters; (2)
5”
rigid casters
Size/Weight with Filters: 20”W x 32”H x 34”L; 117 lbs.
Receiving Instructions
Receiving Instructions
Visually inspect the unit for damage. Remove the primary/secondary filter and ensure that the HEPA filter has not been dislodged
during shipping. The HEPA filter should be sitting on the filter guides and the filter tabs that hold the HEPA filter in place should
be tight.
If the filter is not seated correctly then remove the filter tabs, reposition the filter, and reinstall the filter tabs before
operation to ensure that there is no bypass around the filter. If the filter tabs are loose verify that the filter is in the correct
position and retighten the filter tab nuts.
Содержание OmniAire 2000C Series
Страница 1: ...1 2000C 2000V Series HEPA Air Filtration Machine Operation and Maintenance Manual ...
Страница 9: ...9 ...
