Omnisense Systems Sentry MK4, Руководство пользователя

Страница: 4 / 40

4
Product installation and operation
This product must be installed and operated in accordance with the instructions provided. Failure to do so
could result in injuries, damage to the hardware and/or poor product performance.
Power supply voltage
Connecting this product to a voltage supply greater than the specified maximum rating may cause permanent
damage to the unit. Refer to the technical specifications for voltage rating.
Power supply protection
When installing this product, ensure the power source is adequately protected by means of a suitably rated
fuse or automatic circuit breaker.
Service and maintenance
This product contains no user serviceable components. With the exception of regular cleaning, please refer all
maintenance and repair to Omnisense Systems. Unauthorised repair will void the manufacturer warranty.
Using the supplied cables
Do not cut or extend all supplied cables unless doing so is detailed in the installation guide.
Do not open or disassemble
The unit is factory sealed to protect against atmospheric humidity, suspended particulates and other
contaminates. Do not open the camera or TRS unit for any reason. Disassembly of the camera or TRS unit or
any tampering can cause permanent damage to the system and will void the manufacturer warranty.
Warranty registration
To register your Omnisense Systems product ownership, please visit omnisense-systems.com and register
online. It is important that you register your product to receive full warranty benefits.
01 - Important Information
1.1 For your safety
To prevent damage to your Omnisense Systems product or injury to yourself or to others, read the following
safety precautions in their entirety before using this equipment. Keep these safety instructions where all those
who use the product will read them.
WARNINGS
The consequences that could result from failure to observe the precautions listed in this
section.