Omnik Omniksol-1.5k-TL2-M, Руководство пользователя, Страница: 40 / 83

38
(ill.12) Push the crimped contact into the socket
resp. plug insulator until it engages. Pull lightly on
the lead to check that the metal part has
engaged.
Assembly control
(ill.13) Insert the test pin with the corresponding
side into the socket or plug to the end position. If
the contact is correctly assembled, the white
marking on the test pin
must be still visible.
(ill.14) Screw on the cable gland, hand-tight, with
the tools PV-MS. Or
Screw on the cable gland, with the tools PV-WZ-
AD/GWD and PV-SSE-AD4
In any case:
The tightening torque must be adapted to the
solar cables used in each specific case. Typical
values lie in a range between 2,5 Nm to 3 Nm.
Plugging and unplugging the cable coupler
without safety lock clip PV-SSH4
Plugging
(ill.15)
Plug the coupling together until they engage.
Check correct engagement by pulling on the
coupling.
Unplugging
(ill.16)
Compress the two snap-in springs (X) by hand or
with the PV-MS tool and separate the coupling.
Plugging and unplugging the cable coupler
without safety lock clip PV-SSH4