Omnik Omniksol-1.5k-TL2-M, Руководство пользователя, Страница: 26 / 83

24
5.4 Mounting Procedure
5.4.1 Mark 2 positions of the drill holes on the wall according to the wall mounting bracket in
the carton box. (Application to model: Omniksol-1k/1.5k-TL2-M, for other models please start
from section 5.4.4 )
5.4.2 First, according to the marks, drill 2 holes in the wall. Then, place 2 expansion tubes in
the holes using a rubber hammer. Next, make 2 screws through the mounting holes in
the bracket, then tighten the screws into the expansion tubes. So far, the wall mounting
bracket is fixed already.
5.4.3 Align both sides of the radiator on the hooks of the back panel, move the inverter until
the hooks completely into the slot of the radiator.