L-1633 Rev. 3
© OmniGuide, Inc.
Page 17
Figure 5-2.
Front of the Laser
5.1.1.
Foot Pedal Connection
The footswitch should be plugged directly into the food pedal connector receptacle at
the rear of the box. There is a small red dot on the plug and a red dot on the receptacle,
the plug will only insert when these red dots are lined up. To remove the footswitch,
firmly hold the footswitch connector at the connection point and pull outwards. The
footswitch is shielded with a protection cover. After finishing surgery it should be put
beside the unit.
5.1.2.
Warning Light Output
A door warning light may be connected to this port.
5.1.3.
USB and RJ45 connections
The laser has USB/RJ45 port for service use only.
5.1.4.
High Pressure Gas Input
The back side of the laser, at the Laser Gas Inlet port, should be supplied with medical
grade helium at a pressure ranging from 110 to 125 PSI. The Laser Gas Outlet pressure
is controlled from the touch-screen interface.
____________________________________________________________
Set the outlet pressure as directed by the instructions for use (IFU) for the specific fiber being used.
____________________________________________________________
,AG5:
+5D77@
;EB>3K
;47D
63BF7D
3@;>F7D
3E)ADF
3E)ADF
*"*7367D
3F3)ADF
?7D97@5K(88+I;F5:
Содержание FELS-25A
Страница 10: ...L 1633 Rev 3 OmniGuide Inc Page 10 1 Warning Aperture 2 Laser Stop 3 Laser Warning 4 Laser Danger...
Страница 11: ...L 1633 Rev 3 OmniGuide Inc Page 11 5 Laser Compliance 6 ETL 7 Modification Label 8 Product Identification...
Страница 23: ...L 1633 Rev 3 OmniGuide Inc Page 23 Figure 5 7 Dimensions of the FEL 25A Laser...
Страница 24: ...L 1633 Rev 3 OmniGuide Inc Page 24 Figure 5 8 Dimensions for the Fiber Enabled Laser on OG designed Cart...
