Sensor Preparation
1. Measure the depth of the tank. Cut the sensor measuring piece so that its length is
20mm less than the depth of the tank. Ensure that the shearing line is perpendicular to
the sensor's longitudinal axis
2. Use oil-and-petrol resistant non-conductive sealant to fill the insulation cap (included in
the kit) to 1/4–1/5 of its volume. Recommended sealants: PERMATEX™ MotoSeal® Black,
ABRO™ Black, ABRO™ Red
3. Put the insulation cap on the central rod of the Omnicomm LLS sensor
Setting
Connect the sensor to a PC or a tablet.
Connect the Omnicomm LLS 30160 sensors according to the diagram:
or
Setting
Omnicomm LLS 30160, LLS-AF 4 Fuel Level Sensors
9
