2. Steam out the tank to comply with safety regulations
3. Drill out the central bore using a bimetal core drill (or hole saw) ø35 mm
4. Drill out four mounting holes according to the diagram:
The mounting hole diameter depends on the material of the tank:
ø 4 mm – for metal tanks with wall thickness over 3 mm (cut M5 thread)
ø 7 mm – for plastic and metal tanks with wall thickness up to 3 mm (for rivets)
ø 4 mm – for plastic tanks with wall thickness over 3 mm
Preparation
Omnicomm LLS 30160, LLS-AF 4 Fuel Level Sensors
8
