Omnicomm LLS 20230, Руководство по установке

Страница: 18 / 50

6) Ensure that cable laying routes are free of heated parts and units of the vehicle to
avoid cable insulation fusing.
7) The purposes of connector pin-outs and cable wire colors are illustrated below
(Figure 21).
GND supply circuit (white wire) of BIS 20240 must be connected to the vehicle body
only.
Installing the Fuse
1) The fuse is intended to protect on-board network of the vehicle against short
circuit caused by a breakdown in product wiring.
2) Connect the fuse holder to the feeding cable of the product in the immediate
vicinity of the power circuit of the vehicle.
18
Connection