Omnia voco 8, Быстрая настройка, Страница: 6 / 20

OMNIA VOCO® 8 - QUICK START SETUP GUIDE |
3
AES/EBU I/O
The VOCO 8 provides 4 AES/EBU inputs and outputs on a female DB25 connector conforming to the
Tascam AES/EBU pinout.
Each AES/EBU interface carries 2 channels of audio—Microphones 1 and 2 will feed the left
and right channels of AES/EBU output 1, and so on. If your mixer or router will not “split”
left and right from an AES/EBU feed, you may wish to use only the even or odd channels.
Note that if you use a DB25 cable to directly connect this I/O to the AES/EBU DB25 port on another
device, it MUST use the Tascam pinout (not Yamaha) and the cable MUST reverse the appropriate
input and output pairs (input to output, output to input). Pre-manufactured cables are available
which reverse the appropriate pairs and adaptors are available to convert between Tascam and
Yamaha pinouts.
Tascam standard AES/EBU DB25 pinout
(Female connector on chassis, male connector on cable)
GPIO
A pair of 15 pin GPIO ports provides 5 opto-isolated inputs and 5 solid-state relay outputs per port.
These ports are not currently implemented and are intended for future use (such as carrying GPIO
traffic to and from an AoIP network).
15 pin GPIO connectors using Axia pinout
(Female connector on chassis, male connector on cable)