Omnia voco 8, Быстрая настройка, Страница: 12 / 20

OMNIA VOCO® 8 - QUICK START SETUP GUIDE |
9
Adding the VOCO 8 to Remote Gateway
Once Remote Gateway is installed, you will need to add the VOCO 8 to the list of connections in
Remote Gateway. Scan for units on the network by clicking “Scan”.
Select the interface attached to the same network as the VOCO 8 and click “Run Scan”. You can also
add an IP address block not listed by clicking “Add Custom”. The default port for Remote Gateway
communications with the VOCO 8 is 3001 and should only be changed if necessary. When the scan
is complete, it should detect the VOCO 8. There will be multiple entries displayed for a single VOCO
8—this is due to the fact that there are multiple security levels and logins. You will need all three of
them added to Remote Gateway.