Omni TISSUE MASTER 125 Скачать руководство пользователя страница 3

Страница: 3 / 16

IMPORTANT SAFEGAURDS

-READ ALL INSTRUCTIONS BEFORE USING.

-SAVE THIS OWNER’S MANUAL.

The Tissue Master has been engineered for economical

functionality as well as safety; however, basic safety precautions and

common sense must always be demonstrated when using any

electrical product. Do not attempt to modify any part of the Tissue

Master. If you experience problems with or have questions about your

Tissue Master, contact your authorized dealer or call Omni at

1-800-776-4431 or 770-421-0058.

-DO NOT allow the machine to be submerged in any liquid.

-DO NOT use in any setting other than an indoor laboratory.

-DO NOT plug power cord into an incorrect outlet.

To reduce the risk of burns, electrocution, fire, or injury:

- Use this product only for its intended purpose as described in this

booklet. Do not use attachments not recommended by the

manufacturer.

- DO NOT operate the product if it is damaged in any way.

- Keep this product away from heated surfaces.

DANGER

WARNING

Содержание TISSUE MASTER 125

















Результаты поиска

Содержание TISSUE MASTER 125

Отзывы:

Похожие инструкции для TISSUE MASTER 125

Бренды по названию

Популярные бренды

Omni TISSUE MASTER 125, Руководство пользователя

Результаты поиска

Содержание TISSUE MASTER 125

Отзывы:

Похожие инструкции для TISSUE MASTER 125

Бренды по названию

Популярные бренды