Quick Connect
Coupling Assembly
(Optional)
The Quick Connect Coupling Assembly is
an optional accessory for the Omni Mixer
and Macro.
To use, attach a Quick Connect Adapter
to your chamber assembly or generator
probe.
Next, slide the Adapter into the Quick
Connect Coupling and a retaining ring
positions into place for a secure hold.
To disconnect, simply slide the ring
upward and the processing accessory is
conveniently released.
Determining
Motor Speed
To determine motor
speed during operation,
a tachometer (not in-
cluded) may be inserted
into the Omni Mixer or
Omni Macro through
the top of the motor as
shown by removing the
protective snap cap.
Vessel Restraint Disk
(Optional)
The Vessel Restraint Disk (P/N LT-750) can be used with the Omni Mixer and Macro to
help reduce splashing and contain aerosols during homogenization. This accessory is
compatible with 20mm and larger diameter rotor-stator generator probes and with
containers up to six inches in diameter. The Vessel Restraint Disk also helps secure the
container during processing.