Omni HERO4, Руководство пользователя

Страница: 12 / 25

22 23
Video mode contains two capture modes: Video and Time Lapse Video.
Capture Mode Description
Video (default) Captures video.
Time Lapse Video
Creates video from frames captured at specific
intervals. Time Lapse Video is captured without
audio. Protune
™ is not available in this capture mode.
CAPTURING VIDEO
1. Verify that the camera is in Video mode. If needed, press the Power/
Mode button [ ] to change to Video mode.
2. If necessary, select a different video capture mode (Video or
Time Lapse Video):
a. Press the Settings/Tag button [ ] to open the settings menu.
b. Press the Shutter/Select button [ ] repeatedly until you get
to the desired capture mode.
c. Press the Settings/Tag button [ ] to close the settings menu.
The icon for the selected capture mode appears in the upper left
on your camera status screen.
3. Press the Shutter/Select button [ ]. The camera beeps once and
the camera status lights flash while the camera is recording.
4. To stop capturing, press the Shutter/Select button [ ].
The camera status lights flash three times and the camera beeps
three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
VIDEO MODE VIDEO MODE
VIDEO SETTINGS
The capture mode that you select in Video mode determines the settings
that appear in the rest of the menu.
For instructions on how to change the following settings, see Navigating
Settings Menus (page 21).
PRO TIP: To open the settings menu for the current mode, press the
Settings/Tag button [ ].
INTERVAL
The Interval setting applies to Time Lapse Video. Interval determines
the amount of time that passes between each captured frame. Available
intervals range from 2 seconds (default) to 60 seconds.
Interval Examples
2 seconds Busy street corner
5-10 seconds Sunset
10-60 seconds
Lengthy activities, such as
construction projects
Note: Time Lapse Video is not supported for 1440p50, 1440p60, and 960p120.