Omni Group Superplus, Руководство пользователя

Страница: 22 / 42

3.2 SAFETY DEVICES
The machine is equipped with adequate guards for the protection of the operators exposed to risks
due to moving parts and voltage presence. The following protection devices are installed:
-
emergency pushbutton on control panel. If it is pressed, all the actuators immediately stop;
- safety limit switch on the film roll carriage. It intervenes when an obstacle prevents the carriage
from descending. By intervening it stops the carriage’s descent, causes a reverse and makes
the carriage slightly go up, to allow obstacle removal.
- optional limit switch on pre-stretch carriage door, it intervenes only when the machine is
running if the carriage door opens. By intervening it stops the machine in the shortest possible
time.
3.3 PROTECTIONS AND FIXED REPAIRS
During designing, a solution has been adopted to prevent / limit the access to dangerous zones of
the machine: a series of screw-fixed guards, completely preventing the access to the machine’s
internal parts.
Due to the fixing systems of the guards, tools are needed to open or remove them.
Only remove fixed guards during maintenance operations and while the machine is
disconnected from the power supply.
Never remove the pictograms from the guards, and immediately replace them if they are
faded or not easily readable.
Omni
SUPERPLUS EN IGM_REV6 26