56 Optional
Equipment
(for qualified installers only)
© Travis Industries
4090507
100-01217_000
4
Carefully place the floor
firebacks into position.
You must tip them under
and around the corners of
the burner. Once in
place, bend the accent
light deflectors back to
the correct position (take
care to not damage the
halogen bulbs).
5
Carefully replace the front
and rear grates (they rest
on top of the floor
firebacks).
6
Install the side firebacks
following the directions
below.
7
Restore the fireplace to
the correct configuration.
Place the side firebacks into position.
Remove the clips on both sides (loosen the screws
a couple turns and slide clips up and out).
b
Secure the clips to anchor
the side firebacks.
c
5/16" Nutdriver
a
The ceramic firebacks are fragile. Ensure proper alignment of individual pieces in each step. To achieve
the ideal appearance, you may need to make slight adjustments.
