omisa 6160/LI, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 22

O.M.I.S.A. Srl – 6160/LI - Use and Maintenance Instruction Manual - Version 1/2016
9/22
9.PREPARATION TO THE WELDING
This welding machine is manufactured only for welding pipes and/or fittings in thermoplastic
materials for sewage pipelines; any other use is to be considered not proper and dangerous and it
will relieve the manufacturing company from any kind of responsibility.
Before using the machine, carefully check the perfect working and efficiency of the safety devices
and movable parts, that are not broken or locked and that all parts are mounted in the right way.
Verify that all other conditions, which could influence the regular working of the machine, are
optimal.
Be sure that outlet and plug of the planing tool are compatible. Do not use extensions and adapters
as much as possible, but if they are needed, use only the ones complied with safety rules in force,
checking that cables section is suitable to absorbed power by the planing tool.
The electric planing tool is supplied with grounded wire, so the electrical safety is assured only if it is
correctly connected to an effective grounded network as foreseen by the law in force about electrical
safety.
Unwind for its whole length the electrical feeding cable of the planing tool and do not leave it
inserted into the network, when the planing tool is not used. If required bydiameters of pipes and/or
fittings to be welded, insert relevant reductions into the main clamps, in the proper housing. Make
sure that they are fixed with the proper housing placed on the horizontal flat of the two carriages
and make sure that the two clamps are aligned.
At the same time switch on the thermoplate, not before having completely read the use and
maintenance instruction manual of this article.