Omicron DANEO 400, Руководство пользователя

Страница: 36 / 80

DANEO 400
36
The verification results are updated in real time and classed by means of three different icons.
Found The control block reference (GOOSE) or SVID (SV), the data set,
and the header match.
Found with differences The control block reference (GOOSE) or SVID (SV) match, but not
the data set or header.
Not found The control block reference (GOOSE) or SVID (SV) was not found.
To start the verification, in the Navigation pane, click Start. To clear the verification results and any
unassociated orphans, click Clear.
Issues during the verification Result
GOOSE or SV streams were found
with differences. In the System Under Test section, for comparison
purposes, the GOOSE or SV streams found with
differences are placed to the right of the GOOSE or SV
streams loaded from the SCL file.
GOOSE or SV streams loaded from the SCL file can be
replaced entirely by the GOOSE or SV streams found with
differences.
GOOSE or SV streams were found,
but do not match any GOOSE or SV
streams loaded from the SCL file. This GOOSE or SV stream is an orphan and can be
associated with an IED.
Associating an orphan with an IED
When you select an orphan in the Verification section of the Navigation pane, the orphan details are
displayed. The orphan can be associated with an IED. In this case, from the IEDs list, select the target
IED, and then click . There, you can also associate the orphan to a new IED by clicking .
Tip: The orphan can also be dragged from the Verification section directly onto the appropriate IED
in the Navigation pane.