OMI srl
OMI srl
OMI srl
OMI srl
RA
RA
RA
RA
serie
6/10
710.0065.01.00 Rev.02 - 24.03.2004
1.4 Purpose and description of the air cooled aftercooler
The aftercooler is becoming increasingly popular in particular for the following reasons:
•
Good refrigeration power;
•
Practical;
•
Economical.
The right collocation of the aftercooler unit is at the air outlet point of the compressors, it is basically made up of:
•
A COOLING GROUP with a radiant heat exchanger in copper tubes with aluminum finning, especially studied for applications
with compressed air. It is supplied with a ventilation group formed by an electro-ventilator necessary to dissipate the heat of the
finned pack.
•
A CONDENSATE SEPARATOR for the discharge of as much as possible of the condensation formed in the system as a result
of cooling.
Any overloading of the equipment, within the maximum limits, will cause a lower performance of the unit (higher humidity) but it will not
affect the safety.
1.5 Safety symbols
Air inlet point
Air outlet point
Condensate drain point
Fan motor rotation wise
2.0 RECEIPT AND STORAGE
2.1 Receipt
Upon receipt the client must carefully examine the aftercooler throughly in order to verify the integrity and the availability of all items
listed on the shipping documents.
All claims for missing goods and/or damages have to be notified to us or to the nearest retailer within 8 (eight) days from date of receipt.
It is necessary that the aftercooler is kept in vertical position as shown on the packaging.
2.2 Unpackaging
Unpackaging operation have to be done according to the instruction listed under chap. 3 (Installation).
After the removal of the packaging material, check whether the aftercooler is damage free, and before any action is taken read carefully
this manual.
Keep the packaging in case of need and/or the aftercooler has to be returned to the supplier.
