Omegasonics RESTORATION PRO 3600PW, Руководство по эксплуатации и инструкция

Страница: 6 / 20

6
·
Next to the filters, you
’ll find the diverter valve to change from filtration to spray
nozzle (Spray Gun / Spray Bar Lever).
·
In the spray gun position, water will flow when the trigger is pulled. The spray can be
adjusted by opening clockwise for the Stream Spray or counterclockwise for the O
Mist Spray.
·
Fill the rinse tank with water (
see note at the bottom of this page)
and the proper
dilution of soap to just above the upper spray bar. Using hot water will shorten the
amount of time required to reach the desired temperature. Check drain assembly to
insure that there is no leakage.
·
The Model 3600PW tank dimensions are 36
” x 24” with a 20” overall working depth.
This tank will hold 75 gallons and has a working volume of approximately 60 gallons
when the water level is at the midpoint of the spray bar. This liquid volume does not
include the liquid in the pump / filter system. Use this volume for calculating the
amount of detergent you will use.
*Note About Water*
The quality of your water source can have an important effect on the performance of the
equipment. High levels of calcium, magnesium, sulfur and other contaminants in the
water source can have a negative effect on the type of cleaning soap used. High levels
of calcium and/or magnesium (constitutes hard water) can cause the soap to work less
efficiently and less effectively as intended and can also leave a white, flaky residue on
the parts once dried. If this white spotting occurs and is not desired, it will be necessary
to use soft water, drinking water or distilled water, in the machine. The level of final
cleanliness will dictate the water source used in the machine.