INSTALL GUIDE
GUIDE ID: CST_HA7_G6_G5_20210414
Page 9 of 18
MODEL: OL-HRN-RS-HA7
Installation Mode Selection
Module Programming
Press and hold programming button until
LED turns solid GREEN to register selection.
After registration, follow Factory Reset to change
installation mode and restart this process.
!
2
Press and release programming button
to select installation mode.
LED fl ashes (1x) once = Data Mode (Recommended)
LED fl ashes (2x) twice = Hardwire Mode
1
ENGINE
START
STOP
ENGINE
START
TT
STOP
OFF ACC
START
ON
Turn ignition to ON position.
1
WARNING:
Disconnect power last
Disconnect module from vehicle.
4
Wait, LED will Flash GREEN rapidly.
2
Connect module to computer and proceed
with extended programming.
5
ENGINE
START
STOP
ENGINE
START
TT
STOP
OFF
ACC
START
ON
Turn ignition to OFF position.
3
ENGINE
START
STOP
ENGINE
START
TT
STOP
OFF ACC
START
ON
Turn ignition to ON position.
7
Wait, LED will turn solid GREEN for 2 seconds.
8
ENGINE
START
STOP
ENGINE
START
TT
STOP
OFF
ACC
START
ON
Turn ignition to OFF position.
9
Press UNLOCK on the OEM remote.
10
11
WARNING: Do not press module
programming button.
Connect power fi rst.
Connect all other module connectors
6
Programming complete. Verify all Remote Start settings and test.
x1
If the vehicle is equipped with power
liftgate, open and close the power liftgate
with the OEM keyfob
!
RSX-
G5-end
