![background image](http://html2.mh-extra.com/html/omega/vrt400-series/vrt400-series_instruction-manual_4052208007.webp)
Open
8
9
SLOW JUICER ASSEMBLY
SLOW JUICER ASSEMBLY IN DETAIL
Align hopper front triangle with [ ] bowl triangle
[ OPEN ] first and turn it to clockwise until it
clicks so that the hopper triangle [ ] aligned
with bowl triangle [Close ].
Assemble the parts as following order :
Bowl > Spinning Brush > Strainer. Make sure bowl
triangle [ OPEN ] aligns with strainer triangle [ ].
Place the bowl in the base.
A spinning brush can be assembled regardless
of the direction.
Make sure to press the screw down into the
strainer as in STEP 2. The hopper does not close
properly when the screw does not fit in completely.
1
Insert extraction packing at the bottom of the bowl hard enough into the pulp outlet.
Make sure bowl outer groove aligns with base bump completely
4
Align the hopper rear part with base completely as in below.
The hopper will not close properly when the parts are not assembled correctly.
2,3
Assemble the parts in the order of bowl > spinning brush > strainer > squeezing screw > hopper
(or assemble the spinning brush into the bowl then fit strainer bump in the bowl inner groove).
Make sure all the triangles of bowl [ OPEN ], strainer [ ] and hopper [ ] are aligned in a vertical line.
Hopper
rear part
Hopper
Strainer
Bowl
Squeezing Screw
Strainer
bump
BOTTOM
OF THE
STRAINER
INSIDE THE
BOWL
Bowl inner
groove
Bowl outer groove
Base bump
Extraction
packing
Spinning brush