background image

 

 

IMPORTANT SAFEGUARDS

Please read carefully before using. Follow instructions 

to avoid injury. 

•  To protect against risk of electrical shock or fire, do not

 

put motor base, cord, or plug in water and keep them dry

 

at all times.

•  Do not disassemble the base. All repairs should be made

 

only by authorized personnel.

•  Check voltage to be sure that the voltage indicated on the

 

name plate agrees with your voltage.

•  Close adult supervision is necessary when appliance 

is used 

by or near children.

•  Unplug the power cord from the wall outlet when the appliance 

is not in use.

•  Do not operate any appliance with a damaged cord/plug,

 

a malfunctioning unit, or after the unit is dropped or damaged

 

in any manner.

•  The use of attachments not recommended may cause damage, 

fire, shock, or injury.

•  Keep hands and utensils out of unit when motor is 

running 

to prevent the possibility of severe personal injury or damage

 

to the appliance.

•  Do not attempt to disassemble any attachments while the motor 

is running. Lift appliance with two hands (appliance weight 

approximately 14 lbs.)

•  Do not put any parts into the dishwasher or use hard 

scouring 

powders and hard implements. Exposure to high heat can 

cause damage.

IMPORTANT SAFEGUARDS

Additional usage precautions:

•  Do not pre-operate before inputting food. Doing so may

 

cause a normal squeaking noise.

•  Do not attempt to juice any hard materials, large seeds

 

(seeds which can not be swallowed or chewed), pits, ice,

 

or frozen foods.

•  If food gets stuck in the feeding tube, do not use anything

 

other than the recommended pusher.

•  Do not use for more than 30 minutes continuously

 

(only meant for household use).

SAVE THESE INSTRUCTIONS

Содержание VRT400 SERIES















Отзывы: