![background image](http://html1.mh-extra.com/html/omega/uwpc-2-nema/uwpc-2-nema_user-manual_737839014.webp)
STEP 1. Enter the “SETUP” mode.
To place your transmitter into the “SETUP” mode for programming follow this
procedure.
Figure 5-2. Main Transmitter Board
Press and hold the “ON/OFF” button. While the “ON/OFF” button is being
held, press the “SETUP” button one time and then release the “ON/OFF”
button. The green (TX) indicator on the front of your device should be blinking
at a steady rate. This indicates your End Device is ready to run the configuration
utility software.
STEP 2. Launch Setup Utility Program.
To launch the End Device setup utility program on your PC begin by accessing
the “Programs” list under your “Start Menu”.
Scroll through the list of to find the Omega “TC-Central” folder, then select the
End Device Configuration Program.
Figure 5-3. Launch Setup Utility
End Device Operation
5
5-3
ON/OFF
SETUP
USB
STATUS
LOW BATTERY