Omega TRCN443, Руководство пользователя

Страница: 12 / 26

9.
Lens and Bubble Trap Cleaning
Sensor Unit Lens and Bubble Trapper Cleaning
11
LENS CLEANING OF SENSOR UNIT
Remove the Sensor/Turbidity Detector (5) by turning it clockwise (45degrees) and pull it up. Using a
soft sponge and neutral soap, wash the Led and the photocell Lenses. After this, dry it using a soft
Absorbent paper, a type that will not leave residues.
BUBBLE TRAPPER CLEANING
Clean the Bubble Trapper. Remove the locking ring, then un-thread the Drainage Lid, so the sample
can be drained from the instrument. Wash it using neutral soap and dry it using a soft absorbent
paper, a type that will not leave residues. Make sure to look for areas where residues can
accumulate (shown below picture). Remove the Bubble trapper as shown below and after cleaning
make sure to put it back in place!
Photocell
LED
Bubble Trapper
Body
Drainage Lid