![background image](http://html1.mh-extra.com/html/omega/rh32-series/rh32-series_basic-instructions_737612029.webp)
INST.No.INE-418-1P1CE
-21-
2) Align the protrusions at both sides of the connection part of the tempera-
ture/humidity sensor (RH32S
-RP
and RH32P-
RP
) or at both sides of the
built-in sensor (RH32B-RP) with the concave portions of this meter, and
insert the connection part or the built-in sensor straight.
3) Align the pins of the connection part or the built-in sensor with the
connector of this meter, and push the connection part or the built-in sensor
into this meter straight.
4) Press
DISP
key for about 2 seconds to go to the continuous measurement
mode. At this time, the temperature and humidity values displayed are
different from the exact measured values.
If you squeeze the connection part or the built-in sensor into
this meter, the positions of the connector of this meter and
the pins of the connection part or the built-in sensor are not
fitted and the pins may be broken.
Concave portions
of meter
Protrusions of
built-in type
sensor
<From top>
7. Replacement of temperature/humidity sensor (Ref. [3.1 Overviews and functions])
Ca u ti o n
Содержание RH32 Series
Страница 1: ......