![background image](http://html1.mh-extra.com/html/omega/rh32-series/rh32-series_basic-instructions_737612026.webp)
INST.No.INE-418-1P1CE
-18-
6.1 Continuous measurement mode
By pressing
DISP
key, the temperature/humidity measurement will start after bars are displayed for about 1 second.
The measured temperature will be displayed in the main display 1 and the measured humidity will be displayed in the main
display 2 together with the display of month, day, hour, and minute at the measurement.
The temperature measurement unit and the humidity measurement unit being displayed are the units already selected.
For the selection of the measurement unit, refer to [5.3 Measurement unit selection].
If
“ALARM”
lights in the main marker, the measurement value has exceeded a high alarm setpoint or a low alarm setpoint.
Check the setpoints and reprogram them if necessary. Refer to [4.2 High alarm setpoint] and [4.3 Low alarm setpoint] in
the separate instruction manual Vol. 2 <Function instructions>.
6. Continuous measurement
If
“Er4”
for “low battery” or “meter abnormal” is displayed in the main display 2, replace the batteries
first. (Ref. [5.1 Loading of batteries] in the separated instruction manual Vol. 1 <Basic instructions>)
If
“Er4”
is still displayed by the above replacement of batteries, contact your CHINO’s agent
.
READ
LOG
TIME
UNIT
ALARM
TERM
REP
INT
REF
LOCK
°
F
℃
°
F
H
℃
H
%RH
READ
LOG
TIME
UNIT
ALARM
TERM
REP
INT
REF
LOCK
°
F
℃
°
F
H
℃
H
%RH
Bar
Main marker
Humidity
measurement
Temperature
measurement unit
Main display 1:
Temperature
Main display 2:
Humidity
Month Day
Hour Minute
Caution
Содержание RH32 Series
Страница 1: ......