![background image](http://html1.mh-extra.com/html/omega/rh32-series/rh32-series_basic-instructions_737612020.webp)
INST.No.INE-418-1P1CE
-12-
After the loading of the new batteries, month and day are displayed in
the month/day display part, and hour and minute are displayed in the
sub display.
Battery life
When the battery voltage becomes lower, the low battery mark will light. Replace the batteries with new ones.
If you use this meter with the low battery mark being lit,
“Er4”
will be displayed in the main display 2.
Replace the batteries with new ones.
When any displays are not shown, the batteries voltage becomes lower. Replace the batteries with new ones.
Battery replacement
Replace 2 batteries together.
Battery polarities
Load the batteries with correct polarities.
When the AC power adapter is used:
The low battery mark will not light.
If
“Er4”
displays in the main display 2, take the following procedures.
1)Remove the AC power adapter from this meter.
2)After then, take off the batteries or replace them into new ones.
3)Connect the AC power batteries again.
Note)
The clock will stop (reset) by the above procedure, adjust the clock. (Refer to [5.2 Clock adjustment].)
5. Measurement preparation
Stop of clock in battery replacement
When the clock stops in the battery
replacement, the clock will start from
0 hour 00 minute, January 1
st
, 2001 after the
loading of the new batteries.
READ
LOG
TIME
UNIT
ALARM
TERM
REP
INT
REF
LOCK
°
F
℃
°
F
H
℃
H
%RH
Month/day
display part
Sub display
Low battery mark
Caution
Reference
Содержание RH32 Series
Страница 1: ......