![background image](http://html1.mh-extra.com/html/omega/oo60b/oo60b_installation-operation-and-maintenance-instructions-manual_737441010.webp)
CONTROLS
01) Oven Function Selection Knob.
04) Thermostat Indicator.
02) Power Indicator.
05) Oven Thermostat Control Knob.
03) Oven Timer Buttons (“-”, program, “+”).
06) LED Display.
OVEN FUNCTION SELECTION KNOB
The oven function selection knob is used to select the different functions possible (see table). Each is
explained in detail. To select a function, turn the control knob to the desired oven function and then set the
temperature with the thermostat control.
OVEN THERMOSTAT CONTROL KNOB
The oven thermostat control knob is used to select the desired temperature for cooking. When the
temperature inside your oven reaches the value set, the thermostat will cut the circuit and the thermostat
indicator (4) will go off. When the temperature falls below the set value, the thermostat will again be turned
on alongside the thermostat indicator. It is normal for this to occur during the cooking process, particularly
when the door has been opened.
POWER INDICATOR
The power indicator (2) will be lit when any function is selected.
OVEN TIMER BUTTONS AND LED DISPLAY
The timer consists of the LED display and the buttons beneath it.
When the timer is not in use, the display will show the current time
(see timer section for setting up the current time).
There are three other symbols that occur on the display:
7) Auto: This is displayed when a cooking function is being
controlled by the timer.
8) Manual: This is displayed (without the Auto mode indicator)
when the oven is in manual mode (the operation is NOT being
controlled by the timer). It is displayed with the auto mode indicator
when a timer function is set (but is NOT displayed when a full timer
function has been set and the cooking functions have not started.
9) Minute Minder: This is displayed when the minute minder timer mode is in operation.
NOTE: When indicators are flashing, it means some function can be adjusted.
10) “-“ button: Press this button to decrease a setting.
11) “+” button: Press this button to increase a setting.
12) Program button: Press to cycle through the different timer functions (change time, minute minder,
cooking duration, cooking end time).
9
Содержание OO60B
Страница 2: ......