U.S. Patent No. 8,856,780
01
02
03
04
05
06
ENGINE
START
STOP
STOP ACC
ON START
ON
07
08
ENGINE
START
STOP
STOP ACC
ON START
STOP
09
ENGINE
START
STOP
STOP ACC
ON START
ON
10
11
ENGINE
START
STOP
STOP ACC
ON START
STOP
12
13
14
15
16
17
18
MODULE PROGRAMMING PROCEDURE - 1 OF 2
Close driver door. Re-open driver door to wake
up data bus.
Press Unlock on keyfob 1.
Wait, LED will fl ash GREEN once [1x].
Remove valet key from keyfob 1.
Remove batteries from keyfob 1.
Push start button twice [2x] with keyfob 1 to
ON position. (No battery)
Wait, LED will turn solid RED.
Push start button once [1x] to OFF position.
Push start button twice [2x] with keyfob 1 to
ON position. (No battery)
Wait, if LED fl ashes GREEN rapidly, proceed to
step 11. If LED turns solid RED, repeat steps
8 to 10.
Push start button once [1x] to OFF position.
Disconnect all connectors from module except
the BLACK 20-PIN connector.
Disconnect the BLACK 20-PIN connector.
Remove module from vehicle.
Connect module to computer.
Proceed with extended programming.
Connect module to vehicle.
Close driver door. Re-open driver door to wake
up data bus.
Automotive Data Solutions Inc. © 2016
OEM-AL(RS)-CH7-[OL-MDB-ALL]-EN
PAGE 17 OF 26
• 20160811
DOC.: #29319