![background image](http://html.mh-extra.com/html/car-keys-express/horm-30re/horm-30re_user-manual_2554950001.webp)
PANEL 1
PANEL 2
locks cycle to indicate that the system
has entered pairing mode.
13.
Press the
LOCK
button on each remote
that you want paired. Make sure the
door locks cycle each time to indicate
that the remote has been accepted. The
system will accept up to three remotes.
14.
Turn the ignition to
LOCK
(0) to exit the
pairing mode.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-HON-V3
47 CFR §15.19(a)(3) THIS DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS. (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Note:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
HELP
For help or assistance, please contact technical
support at (888) 598-8910.
OTHER KEYS
Visit
CarKeysExpress.com/store
to find
a variety of award-winning products, like
Universal Car Keys, Universal Car Remotes, and
OEM keys and remotes.
Replacing car keys is simple
and affordable again.
TM
12101 Sycamore Station Place Ste. 140
Louisville, KY 40299
© 2021 Car Keys Express
www.CarKeysExpress.com
V2.0221
REPLACEMENT
REMOTE
HONDA
USER GUIDE
Instruction Manual Part Number: HNPRR-7010
HONDA
Civic
2001-2005
25
Pilot
2003-2007
25
YEARS
PAIR
CODE
MAKE/
MODEL
COMPATIBILITY LOOKUP
PAIRING INSTRUCTIONS
Instructions have timing requirements.
Waiting too long between steps may result
in your vehicle’s computer timing out,
requiring you to start over. Once you begin
the pairing procedure, be sure to move at a
quick and even pace.
PAIR CODE 25
Honda Civic, Honda Pilot
1.
Make sure the doors are unlocked.
2.
Turn the ignition to the
ON
position (II)
3.
Press the
LOCK
or
UNLOCK
button on
the remote.
4.
Turn the ignition to
LOCK
(0).
5.
Turn the ignition to
ON
(II).
6.
Press the
LOCK
or
UNLOCK
button on
same remote.
7.
Turn the ignition to
LOCK
(0).
8.
Turn the ignition to
ON
(II).
9.
Press the
LOCK
or
UNLOCK
button on
the same remote.
10.
Turn the ignition to
LOCK
(0).
11.
Turn the ignition to
ON
(II).
12.
Press the
LOCK
or
UNLOCK
button on
the same remote. Make sure the door
HONDA IGNITION
POSITIONS