3.3.4 INT Mask Control Register
(Read/Write): wBase+5
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0 0 0 0 EN3
EN2
EN1
EN0
Note. Refer to Sec. 3.1 for more information about wBase.
EN0=0
Æ
disable PC0 as a interrupt signal (default)
EN0=1
Æ
enable PC0 as a interrupt signal
outportb(wBase+5,0);
/* disable interrupt */
outportb(wBase+5,1);
/* enable interrupt PC0 */
outportb(wBase+5,0x0f);
/* enable interrupt PC0, PC1,PC2,PC3 */
3.3.5 Aux Status Register
(Read/Write): wBase+7
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Aux7 Aux6 Aux5 Aux4 Aux3 Aux2 Aux1 Aux0
Note. Refer to Sec. 3.1 for more information about wBase.
Aux0=PC0, Aux1=PC1, Aux2=PC2, Aux3=PC3, Aux7~4=Aux-ID. Refer to
DEMO5.C for more information. The Aux 0~3 are used as interrupt source. The
interrupt service routine has to read this register for interrupt source identification.
Refer to Sec. 2.5 for more information.
OME-PIO-D56/OME-PIO-D24 User Manual (Ver.2.1, Oct/2003)
---- 35
