5-1
Section 5 - Receiver Operation
Model: MWTC-REC1
①
Antenna
②
USB Port (mini-B)
③
Indicator Lights
Figure 5-1. Receiver Operation - Model MWTC-REC1
5.1 Mounting, Installation
5.1.1 Mounting
A mounting bracket was included with included with your receiver. The
diagram below shows dimensions and mounting hole location. Rubber bumpers
have also been supplied with your receiver should you wish to use the device on
a desk or a work bench next to your PC.
TIP: Mounting your receiver on a wall away from your PC will provide better signal
strength and help to maximize system range.
When mounting your receiver, care should be taken to make sure it is as far
away from any metal objects. If nearby metal gets too close to your receivers
antenna, it has the potential to interfere with the way the unit receives data and
may cause signal lose or possibly even the inability to communicate at all with
your connector/transmitter.
3
1
2
USB RECEIVER
®
TX
PWR
MWTC SERIES
WIRELESS RECEIVER
NOTE:
Software
5
