4-14
Figure 4-16. Recommended Thermocouple Placement
Installing your connector/transmitter in an application were the device will be exposed
to ambient temperatures above or below the operating limits specified in this manual
will damage your unit and cause the unit to malfunction and produce incorrect
operation.
4.4 Battery Installation or Replacement
4.4.1 Model MWTC-(*)-915
To install or replace the battery in your Connector/Transmitter you must first
remove the two screws located on the back side of your device. This will allow
you to access the battery compartment.
+
-
BATTERY (NOTE POLARITY)
Figure 4-17. Battery Compartment
Connector Operation
4
THERMOCOUPLE
MEASUREMENT AREA
THERMOCOUPLE PROBE
CONNECTOR/TRANSMITTER
MATING CONNECTOR
SAFE
AMBIENT AREA
®
TX
WIRELESS THERMOCOUPLE CONNECTOR
TC
–
+
MWTC
LOW
BATT
PRESS
SETUP
PRESS
I / O
TYPE
CAUTION:
