manualshive.com logo in svg
background image

Page 4

Remote Panic Operation

 Hold 3 seconds

            • The siren will sound.
            • The parking lights will flash.

Should it be needed in a threatening situation, or you feel the need to attract
attention, the alarm can be triggered using the remote control.  Your alarm fea-
tures “Panic Mode”, which allows you to activate “Panic” from the “Arm or Dis-
arm” buttons.

To Activate Remote Panic:
Press & Hold  the “Arm or Disarm” Button for 3 seconds, with the
ignition “Off”.

The Auxiliary Channel may be used to operate an optional function. Please
see your Omega dealer for details on available options.

To Activate the Auxiliary Channel:
Press & Hold the 

“••”

 Button for 3 Seconds.

- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On".

This security system is equipped with a dual stage Digital Tilt Sensor to increase
it’s effectiveness. Each time the alarm is armed, the tilt sensor enters a 5 second
learning period in which it automatically samples it’s current position. If there is
any deviation from this position while armed, the alarm will prewarn or trigger. If
a change in position is detected for less than 2 seconds, the system will prewarn.
If the change is detected for longer, the system will enter a full trigger mode. The
sensor’s sensitivity is adjustable by remote using the following procedure.

Digital Tilt Sensor

The Auxiliary Channel

 Hold 3 seconds

• The siren will emit a long chirp.
• The parking lights will flash once
 (Or the horn will sound if connected)

 Hold 5 seconds

To Adjust the Tilt Sensor:
With the System Armed or Disarmed Press & Hold the “

•••”

 Button

for 5 seconds.

(Continued on next page)

Содержание MC-1














Отзывы: