Page 2
This unit is equipped with a very convenient auto operation mode called RFID.
If selected ON, this feature will Arm & lock the vehicle as you walk away and
Disarm & unlock as you return. It works through constant communication be-
tween the remote control & the main module in the vehicle. The operating
distance will vary by type & shape of the car in which the alarm is installed.
This RFID feature also makes the programmable Anti-Carjacking system the
most secure and easiest to use in the industry. This is explained in the Anti-
Carjacking section.
- The RFID feature can be turned ON & OFF by the remote control:
- If while RFID in On, the control experiences no movement for 10 minutes, it
will go into sleep mode to save battery. Will wake up the instant it is moved.
To turn “On” RFID feature: Press & Hold the button on the remote
control for 2 seconds, until the LED on the remote flashes twice.
To turn “Off” RFID feature: Press & Hold the button on the remote
control for 2 seconds
Regardless of method used to Arm the alarm, it will monitor all protected zones,
and if an intrusion attempt is detected it will activate, or “trigger”.
An activation consists of the following:
• The electronic siren, or optionally the vehicle’s horn, will start sounding.
• The exterior parking lights will flash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the
remote or the Valet /Override switch. If all protected zones are secure at the end
of the activation, the system will stop and rearm itself to detect further entry
attempts. If a protected zone is still open at the end of the activation cycle, the
system will continue to reactivate itself for up to six activated cycles before it
resets itself and ignores the violated zone.
System Armed & Activated
RFID
When RFID is ON
LED will flash every 3 seconds
