If a protected zone is open when actively arming using the transmitter, the sys-
tem will still arm, but it will bypass the open zone until the zone is secured.
Page 7
To Passively Arm the System:
Turn Ignition Off, Then Open &
Close a Door.
Automatic “Last Door Arming” is a programmable feature which allows the alarm
to arm itself and, if desired, lock the doors upon arming. If “On”, this convenient
feature offers a high level of security since the user does not need to actively arm
the system each time the vehicle is exited. Anytime that the ignition is turned off,
and then a door is opened and closed:
• The siren will chirp one time.
• The LED Status Indicator will begin to flash rapidly.
Thirty seconds later:
• The siren will chirp one time again.
• The LED Status Indicator will begin to flash slowly.
• The starter interrupt will engage.
The alarm is now fully armed. The doors will lock at this time, but only if pro-
grammed to do so, and an optional interface must also be installed.
The system can not Last Door Arm if a protected zone is open. Should a vehicle
door be opened during the arming countdown, the countdown will stop and start
Page 26
Mode, and the Auxiliary 2nd Channel is activated, the system will bypass
the current sensing and sensor zones if the system is armed. This allows a
remote start module to start the vehicle without activating the system. The
door and trunk zones remain active, and if violated will activate the system
and turn the vehicle’s engine off. If programming, press the Disarm/Unlock
Button for Start Mode or the Unlock/Disarm Button for Disarm. Please note
that the Auxiliary 3rd Channel has standard full-time Start Mode operation.
14. Transmitter Activated Anti-Carjacking: (On / •Off)
- This feature’s operation is explained on pages 21-22.
15. Door Activated Anti-Carjacking: (On / •Off)
- This feature’s operation is explained on pages 21-22.
16. Ignition Activated Anti-Carjacking: (On / •Off)
- This feature’s operation is explained on pages 21-22.
17. Confirmation Chirp: (•On / Off)
- This feature allows the arm and disarm confirmation chirps to be turned off.
When this feature is turned off, exceptions will be chirps during programming
and the single chirp produced when the system arms by Last Door Arming
and Automatic Rearming.
