Arming the System
THE SIREN WILL
CHIRP ONCE
THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
The system may be "Armed" by one of two methods. The first method involves the
use of a remote transmitter to "Actively" arm the system, provided the ignition
switch is "off" and the system is not in Valet Mode. The second method is a
programmable feature called “Last Door Arming” in which the alarm will “Passively”
or “self” arm.
To Actively Arm the System:
Press & Release the “Arm/Lock”
Transmitter Button
Page 6
Upon Arming: • The siren will chirp one time.
• The parking lights will flash once.
• The doors will lock. (If an optional interface is connected)
• The starter interrupt will engage.
• The LED Status Indicator will begin to flash slowly.
Press &
Release
Page 27
18. 1 or 2 Button Arm/Disarm: (1 Button / •2 Button)
- This feature controls how the transmitter operates the security system.
Having this feature on the “2 Button” setting has the system operating in a
"dedicated button for arming and dedicated button for disarming" fashion. The
"2 Button" setting is the correct one to be used with the included transmitters.
If this feature is set for “1 Button”, a single transmitter button will alternate
arming and disarming the system with each press of that button. This type of
operation is also described as a "single button toggle" for the arming and
disarming of the system. Optional transmitters are available for best use of
this feature. When programming, press Arm/Lock for 1 Button, or Disarm/
Unlock for 2 Button operation.
19. Transmitter Button #4 Operates Remote Panic: (On / •Off)
- This feature, described on page 14, configures the transmitter’s Button #4 to
operate Remote Panic without locking or unlocking the doors. If this feature
is turned on, the Auxiliary 3rd Channel is operated by pressing and releasing
Button #4 instead of pressing and holding it. When programming, press Arm/
Lock for 3rd Channel, or Disarm/Unlock for Remote Panic operation.
20. Single or Multi-Vehicle Operation: (•Single / Multi-Vehicle)
- This feature is described on page 13. When programming, press Arm/Lock
for Single operation, or Disarm/Unlock for Multi-Vehicle operation.
