![background image](http://html2.mh-extra.com/html/omega/freedom-500/freedom-500_owners-manual_3975816010.webp)
Page 23
functions in programming mode are noted. Otherwise, pressing the Arm/Lock
Button turns the feature “on”; pressing the Disarm/Unlock Button turns the feature
“off”.
• = Default Factory Setting
1. Current Sensing: (•On / Off)
- Enables the system to be activated if armed should the system detect a
voltage spike in the vehicle’s electrical system.
2. Current Sensing Activation Delay: (3 Seconds / •3 Minutes)
- Allows option of a longer delay before activation by current sensing can occur.
This is for use in vehicles with equipment, such as cooling fans, which stay
on after the ignition has been turned off.
3. Last Door Arming: (On / •Off)
- Configures the system to automatically arm itself 30 seconds after the last
of the vehicle’s doors is closed.
4. Doors Lock With Last Door Arming: (On / •Off)
- Adds the automatic locking of the vehicle's doors to the previous feature.
Page 10
• The LED Status Indicator will turn “Off”, or begin flashing rapidly
if the Automatic Rearming feature is programmed on or flash a
Zone Violation code if the alarm was activated.
(page 19)
Safety Disarm: If the system is disarmed while it is activated, it will disarm, but
not unlock the doors. This is the Safety Disarm feature; to unlock the doors in this
situation, simply press the Disarm/Unlock Button again. Should the transmitter be
lost, damaged, or its batteries be exhausted, the Valet
/Override Switch
& your
vehicle’s ignition key may be used to disarm the system by performing an
Emergency Override, which is explained on page 17.
Should you wish to arm or disarm the system without
the confirmation chirps, simply press and release the
Transmitter Trunk Button twice. Using the Silent Arm/
Disarm operation simply reverses the armed/disarmed
status of the security system- if the system is disarmed
when the double Transmitter Trunk Button signal is
received, it arms; should the system be armed when the
double signal is received, it will disarm.
Silent Arming & Disarming
Press &
Release
Twice
X 2
To Silent Arm / Disarm:
Press & Release the Trunk Button Twice