![background image](http://html.mh-extra.com/html/omega/freedom-400/freedom-400_owners-manual_736717031.webp)
Page 20
Step 5: If programming multiple features, once the first feature has been config-
ured and acknowledged by 1 or 2 chirps, select the next feature by re-
peating Step 3 and Step 4.
Step 6: Once all of the selected features have been programmed as desired, the
system may removed from Features Programming Mode by allowing it
time to out via 10 seconds of no programming activity, or by pressing
and holding the Transmitter “Small” Button for 4 seconds. Regardless of
method, the system’s exit from Features Programming Mode is indicated
by 3 long siren chirps.
How to Program Transmitters to the System
Whenever the Freedom-400 is powered up, it automatically enters a Transmitter
Programming Mode. If the hood detection circuit (this is a Blue wire) is con-
nected, this wire must be in a “non-grounded” state when the system is powered
up in order for it to enter Transmitter Programming Mode. Where this applicable,
simply hold the hood detection switch down, or temporarily disconnect it. “Pow-
ering up” the system will entail first removing, and then restoring power and ground
to the system’s control module and siren assembly. This is easily accomplished