![background image](http://html1.mh-extra.com/html/omega/fma1700a/fma1700a_user-manual_4127668005.webp)
1
1.
UNPACKING THE FMA1700A/1800A
MASS FLOW METER
1.1
Inspect Package for External Damage
Remove the Packing List and verify that you have received all equipment. If you
have any questions about the shipment, please call the OMEGA
7
Customer
Service Department at 1-800-622-2378 or (203) 359-1660.
Your FMA1700A/1800A Mass Flow Meter was carefully packed in a sturdy card-
board carton, with anti-static cushioning materials to withstand shipping shock.
Upon receipt, inspect the package for possible external damage. In case of exter-
nal damage to the package contact the shipping company immediately.
1.2
Unpack the Mass Flow Meter
Open the carton carefully from the top and inspect for any sign of concealed ship-
ping damage. In addition to contacting the shipping carrier please forward a copy
of any damage report to OMEGA
7
directly.
When unpacking the instrument please make sure that you have all the items
indicated on the Packing List. Please report any shortages promptly.
1.3
Returning Merchandise for Repair
Please contact an OMEGA
7
customer service representative and request a
Return Authorization Number (AR).
It is mandatory that any equipment returned for servicing be purged and neutral-
ized of any dangerous contents including but not limited to toxic, bacterially infec-
tious, corrosive or radioactive substances. No work shall be performed on a
returned product unless the customer submits a fully executed, signed SAFETY
CERTIFICATE. Please request form from the Service Manager.
2.
INSTALLATION
2.1
Primary Gas Connections
Please note that the FMA1700A/1800A Mass Flow Meter will not operate with liq-
uids. Only clean gases are allowed to be introduced into the instrument. If gases
are contaminated they must be filtered to prevent the introduction of impediments
into the sensor.
CAUTION: Some of the IC devices used in the FMA1700A & FMA1800A are
Electro Static Discharge (ESD) sensitive and may be damaged by improper
handling. When wiring interface connector, adjusting or servicing the meter,
use of a grounded ESD protection wrist strap is required to prevent inadvertent
damage to the CMOS integral solid state circuitry. When 9 pin Interface
D-connector is not used do not remove factory installed ESD protection cover.
Содержание FMA1700A
