Omega FLR 1000, Руководство пользователя

Страница: 22 / 33

pg. 22 of 33
E. Specifications For Liquid Units
FLR 1000 FLR 1000-BR FLR 1000-ST FLR 1000-ST-I
Analog Signal Accuracy
(including linearity) ±1.0% Full Scale
1
Repeatability ±0.2% Full Scale
1
Pressure Rating 100 psig
(6.8 bar) 500 psig
(34.5 bar)
Temperature Rating Operating Range: 5 to 55ºC
Storage Range: 0 to 70ºC
Temperature Sensitivity ±0.2% F.S.
1
or less per ºC
Wetted Materials Ryton
®
316 Stainless
2
Epoxy
Glass
Sapphire
Brass
Ryton
®
316 Stainless
2
Epoxy
Glass
Sapphire
316 Stainless
Ryton
®
Epoxy
Glass
Sapphire
O-Ring Material Standard - Viton
®
EPDM Optional
Fitting Material (Standard) Acetal Brass Stainless Steel
Fitting Material Optional Kynar PVDF
Brass
Stainless Steel
Acetal
Kynar PVDF
Stainless Steel
Acetal
Kynar PVDF
Brass
Recommended Filtration 25 microns or less
Compatible Liquids Low viscosity (ideally <10cS)
Translucent or transparent
Minimum amount of entrapped air or gas
0-5VDC Output Signal Standard
Minimum 2.5 K Ω load
N/A
Pulse Output Signal “P” Suffix Only
7.5VDC peak buffered square
wave
Typically 0-400Hz
±3.0% Full Scale accuracy
N/A
4-20mA Output Signal N/A N/A N/A Non Isolated
Current loop
should be
<500 Ω
Typical Power
Consumption Standard: 12 VDC @ 35 mA
(11.5-15 VDC)
24VDC @ 65mA
Response Time Typically <1 second for 63% of final value
Reliability 100,000 hours MTBF
Certifications CE Approved
89/336/EEC (EN 55011 & EN
50082-1)
73/23/EEC Low Voltage Directive
None
Ratings IP10 (NEMA 1)
Warranty 1 year limited
1. Specifications from 10-100% of rated flow. Linearity is best fit straight line. All
calibrations performed with deionized water unless otherwise stated on calibration
certificate