![background image](http://html1.mh-extra.com/html/omega/dpf20-series/dpf20-series_user-manual_4064940006.webp)
6
DPF20 Frequency, rate, total or period counter
Instruction Manual
Button ‘LE’
Earth connection - Although a
terminal is provided for earth
connection, this connection is
optional. The instrument does
not need earth connection for
correct operation nor for com
-
pliance with the security regu
-
lations.
~
~
+
-
8 9 0
Fuse - To comply with security regulation 61010-1, add to the power
line a protection fuse acting as disconnection element, easily acces
-
sible to the operator and identified as a protection device.
Power ‘H’
fuse 250 mA time lag
Power ‘L’
fuse 400 mA time lag
1.7
Power connections
1.6 Front view
Button ‘UP’
Logo
Alarms
Units
Button ‘SQ’
‘Configuration menu’
(see section 1.19)
‘Fast access‘
(see section 1.19.12)
1.8
Sensor configuration and connections
Signal
(see section 1.10)
Option 1
Option 2
Option 3
Power
(see section 1.7)
Detail of the plug-in screw terminals provided with
the instrument. The instrument is provided with all
terminals needed, both male and female.
1.9 Rear view
1.10
Signal connections
Selecting one of the sensors listed at the
‘
SnSr’ menu entry, will configure the sen
-
sor parameters to the values indicated in
the table.
The table also indicates the typical con
-
nections for each type of sensor. Param
-
eters can be manually modified.
Connections are indicated for a single sen
-
sor connected to the channel A. For two
sensors (for inhibition control, quadrature
signal, etc) apply the same connection cri
-
teria also to channel B.
Note : indicated values are typical values.
Check the correct specifications with your
sensor datasheet and adapt the required
configuration and connections as needed.
Sensor
Connections
Pulls
Vexc. Antirrebound
filter
Trigger
Mechanical contact 0 V channel A
pull-up
no
100 mSec.
2,5 Vdc
Namur
channel A Vexc
pull-down
9 Vdc
no
3,0 Vdc
NPN 2 wires
0 V channel A
pull-up
18 Vdc
no
2,5 Vdc
NPN 3 wires
0 V channel A Vexc
pull-up
18 Vdc
no
2,5 Vdc
PNP 2 wires
0 V channel A
pull-down 18 Vdc
no
2,5 Vdc
PNP 3 wires
0 V channel A Vexc
pull-down 18 Vdc
no
2,5 Vdc
Push-pull
0 V channel A Vexc
no
18 Vdc
no
2,5 Vdc
TTL
CMOS
Pick-up
0 V channel A
no
5 Vdc
no
2,5 Vdc
AC<30
Vp
Inductive
0 V channel A
no
no
no
0 Vdc
Table 2 - Configuration and connections for different types of sensors.
Front reset
(see section 1.19.14)
Vexc.
1 2 3 4 5
Canal B
Reset
0 V
Canal A