![background image](http://html1.mh-extra.com/html/omega/dpf20-series/dpf20-series_user-manual_4064940023.webp)
23
DPF20 Frequency, rate, total or period counter
Instruction Manual
This instrument has been designed and verified conforming to the 61010-1
CE Security Regulation, for industrial applications.
Installation of this instrument must be performed by qualified personnel
only. This manual contains the appropriate information for the installation.
Using the instrument in ways not specified by the manufacturer may lead to
a reduction of the specified protection level. Disconnect the instrument from
power before starting any maintenance and / or installation action.
The instrument does not have a general switch and will start operation as
soon as power is connected. The instrument does not have protection fuse,
the fuse must be added during installation.
The instrument is designed to be panel mounted. An appropriate ventilation
of the instrument must be assured. Do not expose the instrument to excess
of humidity. Maintain clean by using a humid rag and do NOT use abrasive
products such as alcohols, solvents, etc.
General recommendations for electrical installations apply, and for proper
functionality we recommend : if possible, install the instrument far from
electrical noise or magnetic field generators such as power relays, electrical
motors, speed variators, ... If possible, do not install along the same conduits
power cables (power, motor controllers, electrovalves, ...) together with sig
-
nal and/or control cables.
Before proceeding to the power connection, verify that the voltage level
available matches the power levels indicated in the label on the instrument.
In case of fire, disconnect the instrument from the power line, fire alarm
according to local rules, disconnect the air conditioning, attack fire with car
-
bonic snow, never with water.
1.24 Precautions on installation
Risk of electrical shock. Instrument terminals can be connected
to dangerous voltage.
Instrument protected with double isolation. No earth connection
required.
Instrument conforms to CE rules and regulations.
1.25
CE declaration of conformity
Products
DPF20
The manufacturer declares that the instruments indicated comply with the
directives and rules indicated below.
Electromagnetic compatibility directive 2014/30/EU
Low voltage directive 2014/35/EU
Directive ROHS 2011/65/EU
Security rules EN-61010-1
Instrument
Fixed
Permanently connected
Pollution degree 1 and 2 (without condensation)
Isolation
Double
Electromagnetic compatibility rules EN-61326-1
EM environment Industrial
Immunity levels
EN-61000-4-2 By contact ±4 KV
Criteria B
By air ±8 KV
Criteria B
EN-61000-4-3
Criteria A
EN-61000-4-4 On AC power lines : ±2 KV
Criteria B
On DC power lines : ±2 KV
Criteria B
On signal lines : ±1 KV
Criteria B
EN-61000-4-5 Between AC power lines ±1 KV
Criteria B
Between AC power lines and earth ±2 KV
Criteria B
Between DC power lines ±1 KV
Criteria B
Between DC power lines and earth ±2 KV
Criteria B
Between signal lines and earth ±1 KV
Criteria B
EN-61000-4-6
Criteria A
EN-61000-4-8 30 A/m at 50/60 Hz
Criteria A
EN-61000-4-11 0 % 1 cycle
Criteria A
40 % 10 cycles
Criteria A
70 % 25 cycles
Criteria B
0 % 250 cycles
Criteria B
Emission levels
CISPR 11
Instrument Class A, Group 1
Criteria A
According to directive 2012/19/EU, electronic equip
-
ment must be recycled in a selective and controlled
way at the end of its useful life.