1. Plug the unit into a properly grounded
115V power supply. The unit will
initialize, scrolling the following three
messages on the front panel:
Idt
code
r 0I
(
r 0I
equals the revision code of
the micro controller. Keep track
of the revision code for future reference.)
2. The present value of the
Thermocouple should be displayed. If
a value is not displayed, follow these
steps:
Unplug the unit
Verify the power and TC connections
Check your power source
Plug the unit in again
1.4.4 Turn
On the Unit
S
ETUP
1
9
