2.1 Introduction
The unit has two different modes of
operation. The first, Run Mode, is used to
display process value and display or clear
peak and valley values. The other mode,
Configuration Mode, is used to navigate
through the menus options and configure
the meter.
The S51 jumper must be removed (which
is the factory setting) and the S4 jumper
must be installed (which is not the factory
setting) for all menu configuration options
to be available. (See page 34 for further
jumper information.)
This part of the manual, Operation, will
explain both the Run Mode and the
Configuration Mode and is divided into
the following sections:
Meter Buttons
Display Descriptions
Menu Configurations
Overview
0
PERATION
2
10
