41
IEC
Requirements
The maximum supply current is line voltage dependent:
230 mA for a 24 Vac/dc input
fuse rating=700 mA
60 mA for an 85-250 Vac input fuse rating=100 mA
Output Specifications
Output Type
Max current
Voltage
Leakage
R
5 A
250 Vac
1000 M ohms
T
1 A
250 Vpk
1 mA
DC
20 mA
5 V
NA
CLEANING INSTRUCTIONS
1.
Remove power from the unit prior to any cleaning operation.
2.
Use a cotton cloth to gently and sparingly apply isopropyl
alcohol only. Do not use cleaners or other solvents as they may
damage the unit.
3.
Allow the unit to dry completely prior to reapplying power.
USE OF THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY
THE MANUFACTURER MAY IMPAIR PROTECTION PROVIDED
BY THE EQUIPMENT!
5. To abort Autotuning
Action
Display
and return to normal
Press and hold
operation:
for 3 sec.
Press
Press
PV + SV
6. To enter FOP (Manual)
Action
Display
operating mode:
Press and hold
for 3 sec.
Press
+ PV +
% of Power
Value
Press
to set new
% of Power Value
Press
to
+ PV +
set % of Power
% of Power
for Output 2
Value
if desired.
7. To escape from FOP
Action
Display
(Manual) operating mode:
Press and hold
for 3 sec.
Press
Press
PV + SV
40
Quick-Helps
2. To enter Standby operating mode: (cont.)
From Security Level Menu: Press
PV + SV
Press and hold
for 3 sec.
Press
Press
+ PV + SV
3. To escape from Standby
Action
Display
operating mode:
Press and hold
for 3 sec.
Press
Press
PV + SV
4. To initiate Autotuning:
Action
Display
Enter Standby
operating mode
(See Quick-Help #2)
Press
Press
Press
+ PV + SV
